For Int'l Orders Call +001 800 242 3477
Cart 0
See Table below for product specifications.
Crosby Horizontal Lifting Clamps, IPH10/IPH10/J Cap 2-12 ton Per Pair - WiscoLift, Inc.


Crosby Horizontal Lifting Clamps, IPH10/IPH10/J Cap 2-12 ton Per Pair

$ 516.94

Crosby's Horizontal Lifting Clamps include a spring loaded tension with pretension feature that allows the user to attach the clamps to the material for horizontal lifting and transfer of non-sagging material.

Lifting Clamps

  • .5 and 1 ton clamps have NO handle or magnets
  • Capacities per pair 2-12 ton
  • Two or more clamps must be used together
  • For non-sagging bundles and/or materials
  • Jaw opening capacity for IPH10 is 0-2.38''; IPH10/J is 2.36-4.75"
  • Clamps weigh 3.97-52.9 lbs. each
  • MINIMUM load must be 10% of rated capacity.
  • Proper instruction for the personnel is of vital importance. 
  • Hardness: With the standard clamps it is possible to lift steel with a surface hardness of 363 HV10. For harder steel types, contact WiscoLift
  • Temperature: The standard lifting clamps may be used with temperatures that lie between 100 ºC (212 ºF) and -40 ºC (-40 ºF).
  • There are restrictions for operation in special atmospheres (e.g. high humidity, explosive, saline, acid, alkaline). 
  • Ensure that all attachments between lifting eye and crane are properly fitted, secured and coupled. 
  • Several plate dogs may be transported or lifted per lift.  
  • IPH10 clamps may not be used for sagging plates. 
  • During the tensioning of cables or chains the clamps must remain properly positioned.
  • During the descent of the load there may be no obstacles present under the load that can impede the load causing a clamp to be unloaded. The clamps may only release the load when it is in a stable position.
Crosby lifting clamps are also available with larger jaw opening and without spring. For more information, please call our Sales Representative at 800-242-3477 or email us at

Share this Product

More from this category